Vanguard DMOM‐600 - Manual (Page 34)

Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL REV 2
30
Press any key to return to the “START‐UP” menu.
j. The following screen will be displayed:
Press the [1] key (YES) to save the test record.
The following screen will be displayed:
NOTES
If a USB flash drive is connected to the unit, the following screen will be
displayed instead:
1. SAVE INTERNALLY
Press the
[1]
key (SAVE INTERNALLY) to save the test record to the
unit’s Flash EEPROM. The following screen will be displayed:
1.SAVE INTERNALLY
2.SAVE TO THUMB DRIVE
record number 1
has been saved!
save this record?
1. YES
2. NO
REC_000 SAVED TO
THUMB DRIVE