Tracer TP-9000 Glo-Away M-L AM05020-2 - Manual

GLO-AWAY TM TP-9000
Fluorescent Dye Cleaner/Remover
TRACERLINE ® GLO-AWAY TM is a fast and easy way to
remove fl uorescent leak detection dyes from all surface
areas. It can be used to remove all manufacturers’ dyes
and also as a general-purpose cleaner.
DIRECTIONS:
1. Spray GLO-AWAY on all parts where dye is detected.
2. Wipe all sprayed areas.
3. Spray liberally with water to remove both the
GLO-AWAY and the dye.
4. Check all areas again with an inspection lamp to be
sure that all of the dye has been removed.
PLEASE NOTE
• Prevent freezing. If frozen, allow to thaw, shake well
and use. Product may be thawed by submerging in
warm water.
• Keep out of reach of children.
• FOR PROFESSIONAL SERVICES ONLY.
FIRST AID
EYES: Flush eyes thoroughly with water for 15
minutes. Seek medical attention if irritation persists.
SKIN: Flush thoroughly with soap and water. Dry and
apply skin lotion.
INGESTION: If swallowed, drink warm water to dilute
stomach contents. Induce vomiting. Call physician
immediately.
INHALATION: Not known to cause irritation.
English
For product information and technical assistance,
call us at 1-800-641-1133. Outside the U.S. and
Canada, call 516-333-1254. CHEMTREC Emergency
Telephone No. (24 hours): 1-800-424-9300. Call
collect outside continental U.S.: 703-527-3887.
Consult Material Safety Data Sheet (MSDS) on our
website at www.tracerline.com.
TRACER PRODUCTS
A Division of Spectronics Corporation
956 Brush Hollow Road, P.O. Box 483
Westbury, New York 11590
Tel: 800-641-1133 • Fax: 800-354-2353
Outside U.S. and Canada:
Tel: 516-333-1254 • Fax: 516-876-8411
www.tracerline.com
12/08 AM05020-2
PRINTED IN U.S.A
(1,1) -1- TP-9000 GLO-AWAY AM05020-2.indd 6/20/2013 11:42:32 AM (1,1) -1- TP-9000 GLO-AWAY AM05020-2.indd 6/20/2013 11:42:32 AM