Tracer Glo-Away TP-9000 AM05020 - Manual

GLO-AWAY
TM
TP-9000
GLO-AWAY
TM
No. TP-9000
GLO-AWAY
TM
is a fast and easy way to
remove fluorescent leak detection dyes from all surface
areas. It can be used to remove all manufacturers’ dyes
and also a general-purpose cleaner.
Fluorescent Dye Cleaner/Remover
DIRECTIONS:
1.) Spray GLO-AWAY™ on all parts where dye is detected.
2.) Wipe all sprayed areas.
3.) Spray liberally with water to remove both the GLO-AWAY™ and the dye.
4.) Check all areas again with an ultraviolet or UV/blue lamp to be sure that all of the
dye has been removed.
PLEASE NOTE
• Prevent freezing. If frozen, allow to thaw, shake well and use. Product may be
thawed by submerging in warm water.
• Keep out of reach of children.
• FOR PROFESSIONAL SERVICES ONLY.
FIRST AID
EYES: Flush eyes thoroughly with water for 15 minutes. Seek medical attention if
irritation persists.
SKIN: Flush thoroughly with soap and water. Dry and apply skin lotion.
INGESTION: If swallowed, drink warm water to dilute stomach contents. Induce
vomiting. Call physician immediately.
INHALATION: Not known to cause irritation.
For product information and technical assistance, call us at 1-800-641-1133. Outside the U.S. and
Canada, call 516-333-1254. CHEMTREC Emergency Telephone No. (24 hours): 1-800-424-8300. Call
collect outside continental U.S.: 703-527-3887. Consult Material Safety Data Sheet (MSDS) on our
website at www.tracerline.com.
TRACER PRODUCTS
A Division of Spectronics Corporation
956 Brush Hollow Road, P.O. Box 483
Westbury, New York 11590
800-641-1133 · 516-333-1254
Fax: 800-354-2353 · 516-876-8411
www.tracerline.com
6/05 AM05020
PRINTED IN U.S.A.