Tracer TP-3400 Dye-Lite M-L AM13008 User Manual
Dye-lite, Tp-3400
Dye-Lite
®
TP-3400
All-In-One™ Fluorescent Leak Detection Dye
For Oil and Oil-Based Fluids
U.S. Patent No. 6,165,384
• Dye-Lite
®
All-In-One™ multipurpose fluorescent leak detection dye is
used in conjunction with Tracerline
®
ultraviolet or UV/blue light lamps
to pinpoint leaks in oil and oil-based fluid systems.
• Do Not Add to Brake Systems.
• You must wear fluorescence-enhancing glasses to protect your eyes
and to make leaks clearly visible. The glow will show best under low
light conditions.
• PLEASE NOTE: Wipe all dye spills immediately to prevent damage to
paints, finishes and bumpers. Dye may stain hands and clothing.
ADDING DYE AND INSPECTING FOR LEAKS
• Turn OFF the engine. Add TP-3400 through the appropriate fill port.
The recommended dilution ratios of dye to host fluid are:
Automotive applications
Suggested dilution ratio
Engine oil
(includes synthetics)
Gasoline
0.5 oz per 4-6 qt
Diesel
0.5 oz per 4 qt
Power steering fluid
0.5 oz per 4 qt
Automatic transmission fluid 1 oz per 12 qt
Gasoline and diesel fuels
1 oz per 12-18 gal
Mobile hydraulic applications Suggested dilution ratio
Light-colored petroleum-based fluids 1 oz per 4-6 gal
Very dark or intensely blue
petroleum-based fluids
1 oz per 4-6 qt
NOTE: If the oil is very dirty, you may need to add more dye to obtain a good
fluorescent response (additional dye will not harm the engine) or change the
oil or fluid before adding the dye.
• Run the engine for 5 to 10 minutes so the oil or fluid and dye will mix well.
Use a Tracerline
®
ultraviolet or UV/blue light lamp to inspect the dipstick or
fill port and check for a bright fluorescent response. Add more dye if needed.
A short road test is recommended to allow the dye to penetrate all leaks prior
to inspection.
• Turn OFF the engine. Inspect possible leak areas with the Tracerline
®
lamp. In hard to reach areas, use a mirror to reflect the light, or wipe
suspected areas with a clean, white cloth. Check the cloth with the lamp for
fluorescence. All leaks will show with a bright yellow-green glow.
• After the leaks are repaired, clean the remaining dye from the leak sites with
Tracer Products’ GLO-AWAY™ dye cleaner/remover or a shop cleaner.
Remaining dye could be mistaken for a leak. Check all areas again with the
lamp to make sure that no dye remains. Run the engine for another 5 to 10
minutes and reinspect with the lamp to be sure that all leaks have been
repaired and no new leaks appear.
• It is not necessary to change the oil or fluid after adding the tracer dye.
When used properly, Dye-Lite
®
can safely remain in the system until the host
fluid is changed.
CAUTION
Keep out of reach of children. Store in a cool place away from direct
sunlight, heat sources and open flame. May be harmful or fatal if
swallowed. Avoid contact with eyes or skin. Wash thoroughly after
handling. Wipe all spills to avoid stains.
For product information and technical assistance, call us at
1-800-641-1133. Outside the United States call 516-333-1254. Emergency
Telephone No.: 1-800-424-9300 (24 Hours) CHEMTREC. Call collect
outside continental U.S.: 703-527-3887. Consult Material Safety Data Sheet
(MSDS) on our website at www.tracerline.com.
English
• Le colorant fluorescent polyvalent de détection de fuites Dye-Lite
®
All-In-One™ est utilisé conjointement avec les lampes à ultraviolets
Tracerline
®
ou aux UV/lumière bleue afin de découvrir des fuites dans
les circuits d’huile ou de liquides à base d’huile.
• Ne pas ajouter au circuit de freinage.
• Vous devez porter des lunettes d’amélioration de la fluorescence afin
de protéger vos yeux et de rendre les fuites clairement visibles. La
visibilité de la fluorescence ne sera que meilleure dans des conditions
d’éclairage faible.
• VEUILLEZ NOTER: Essuyez immédiatement tout déversement de
colorant afin d’éviter d’endommager les peintures, les finitions et les
pare-chocs. Le colorant peut tacher les mains et les vêtements.
Dye-Lite
®
TP-3400
Colorant fluorescent de détection de fuites All-In-One™
Pour l’huile et les liquides à base d’huile
Brevet U.S. No 6,165,384
French
(1,1) -2- TP-3400 Dye-Lite (was A03129) AM13008.indd 4/11/2013 4:16:34 PM
(1,1) -2- TP-3400 Dye-Lite (was A03129) AM13008.indd 4/11/2013 4:16:34 PM