Specifications – Teledyne LeCroy AP033 User Manual
Page 11
Operator’s Manual
922260-00 Rev A
5
Specifications
Nominal Characteristics
Nominal characteristics describe parameters and attributes that have are guaranteed by design,
but do not have associated tolerances.
Input Configuration:
True Differential (+ and – Inputs); with shield Ground connector.
Effective Gain
1
:
X1, X10,
ч
10,
ч
100
2
Input coupling:
DC. AC Coupling obtained by installing AC Coupling Adapter.
Differential Mode Range:
(10X Gain):
±40 mV
(÷1 Attenuation)
±400 mV
(÷10 Attenuation)
±4 V
(÷100 Attenuation)
(1X Gain):
±400 mV
(÷1 Attenuation)
±4 V
(÷10 Attenuation)
±40 V
(÷100 Attenuation)
Common Mode Range:
±4.2 V
(÷1 Attenuation)
±42 V
(÷10 Attenuation)
±42 V
(÷100 Attenuation)
Maximum Input Voltage:
±
42 V either input from ground
1
From combination of gain, internal and external attenuation.
2
Use external plug-on ÷10 attenuator for ÷100.
Warranted Electrical Characteristics
Warranted characteristics are parameters with guaranteed performance. Unless otherwise noted,
tests are provided in the Performance Verification Procedure for all warranted specifications.
LF Gain Accuracy:
2% into 50 Ω
load
3
, measured at 1 kHz with 0 V offset
Common Mode Rejection Ratio
4
(Probe head grounded, DC Coupled, ÷1 attenuation without
external attenuator):
70 Hz
≥ 3160:1
(70 dB)
1 MHz
≥ 1000:1
(60 dB)
250 MHz
≥ 5:1
(14 dB)
3
Output impedance 50 Ω, intended to drive 50 Ω. Add uncertainty of termination impedance to accuracy.