Staub Electronics HD-2CAT-1080P-130 BINARY - CAT5 HDMI EXTENDER - Manual (Page 8)

SPECIFICATIONS
Technical Transmitter Receiver
HDMI Compliance HDMI 1.3c
Video Bandwidth Single-link 225MHz (6.75Gbps)
Video Support 480i / 480p / 720p / 1080i / 1080p up to 36-bit color
HDMI over UTP Transmission
(24-bit) Full HD (1080p)-130ft (CAT5e) / 165ft (CAT6)
HD (720p/1080i)- 164ft (CAT5e) / 200ft (CAT6)
Audio Support Surround sound (up to 7.1ch) or stereo digital audio
Signal Equalization 8-level digital control at RX
Input TMDS Signal 1.2 Volts (peak-to-peak)
Input DDC Signal 5 Volts (peak-to-peak, TTL)
Input 1x HDMI 2x RJ45
Output 2x RJ45 1x HDMI
HDMI Connector Type A (19-pin female)
RJ45 Connector WE/SS 8P8C 2 LED indicators
Rotary Control Switch — Signal level
Mechanical
Housing
Metal enclosure
Dimensions (L x W x H) 3.3” x 3.6” x .94”
Weight .70 lbs each
Power Supply 5V 4A DC
Power Consumption 1.5 Watt (max)
*Note: Specifications are subject to change without notice. Dimensions and weight are approximate.
WARRANTY
2-Year Limited Warranty
This Binary™ Product has a Two-Year Limited Warranty. This warranty includes parts and labor repairs
on all components found to be defective in material or workmanship under normal conditions of use.
This warranty shall not apply to products which have been abused, modified or disassembled. Products
to be repaired under this warranty must be returned to SnapAV or a designated service center with
prior notification and an assigned return authorization number (RA).
For Technical Support: 1-866-838-5052
100117