IAI America IA-IO-3205-PN - Manual (Page 5)

4
INTELLIGENT ACTUATOR
4. External Interface Specifications
4.1 Terminal Assignments for External DIO Interface
Table 4-1 Overview of Multi-point DIO Interface Specifications
Item Overview Remarks
Connector 100-pin half-pitch flat connector HIF6-100PA-1.27DS (by Hirose)
Connector name External DIO connector
External power supply 24 VDC ± 10%
A separate power supply is used for each
group of 24 DIs/24 DOs.
DI 48 points
DO 48 points
Pin layout (connector fitting surface)
Note: In the case of the K-Type expansion DIO board, the external power-supply terminals for IN024 to
047/OUT324 to 347 (pin 26 (24 V), pin 100 (0 V)) are connected internally to the IO24V power-
supply connector on the panel board.
Pin 50
Row A
Pin 100 Pin 51
Pin 1
Row B