IAI America IA-IO-3205-PN - Manual (Page 2)

1
INTELLIGENT ACTUATOR
This board is a multi-point DIO board equipped with 48 input points and 48 output points for use with an X-
SEL controller.
1. Overview
1.1 Features
[1]
96 I/O points in one board
One board provides 48 input points and 48 output points, thus effectively adding to the I/O control
capability of your X-SEL controller.
[2]
DIO interface supporting both NPN and PNP
Just like the current I/O board, the DIO interface is also available in the NPN or PNP specification.
[3]
Overcurrent and I/O-power monitor function
The DIO board detects overcurrent in the DO port and monitors the I/O power-supply voltage. If an
out-of-spec current or voltage is detected, the DO output will be cut off. Note, however, that the
overcurrent detection value of the DIO board is 400 mA per 24 points, which is different from the
threshold specification of the current I/O board (400 mA per 8 points).
1.2 Board Variations
This board comes in the variations listed in the table below.
Table 1-1 Board Variations
Multi-point DIO Board for Expansion Slot of K-Type Controller
Model Name
IA-IO-3204-NP
X-SEL expansion multi-point DIO board, NPN specification
IA-IO-3204-PN X-SEL expansion multi-point DIO board, PNP specification
Multi-point DIO Board for Standard Slot of J-Type Controller
Model Name
IA-IO-3205-NP
X-SEL standard multi-point DIO board, NPN specification
IA-IO-3205-PN X-SEL standard multi-point DIO board, PNP specification