IAI America RS - Manual (Page 33)

3. Connecting with the Controller
27
• Do not pull the cable with a strong force.
• Pay attention not to concentrate the twisting force to one point on a cable.
• Do not pinch, drop a heavy object onto or cut the cable.
• When a cable is fastened to affix, make sure to have an appropriate force and do not
tighten too much.
Do not use spiral tube in any
position where cables are bent
frequently.
• PIO line, communication line, power and driving lines are to be put separately from
each other and do not tie them together. Arrange so that such lines are independently
routed in the duct.
Power Line
Duct
I/O Line
(Flat Cable, etc.)