IAI America RS - Manual (Page 31)

3. Connecting with the Controller
25
3. Connecting with the Controller
For the controller, only the dedicated controller manufactured by our company can be used.
Using other controllers may cause a problem such as burning the product, ignition or generating heat.
Use the dedicated cable enclosed in the package when connecting the actuator and the controller.
[Connecting with XSEL-J/K Controller]
Dedicated cable
(Connect actuator with the dedicated controller)
r = 51mm or mere (Movable Use)
r = 34mm or mere (Fixed Use)
Dedicated controller
XSEL-J/K
x Motor Cable CB-X-MA***
x Encoder Cable CB-X-PA***
x Limit Switch Cable CB-X-LC***
*** indicates the cable length.
Up to 30m can be specified.
Example) 080 = 8 m
[Connecting with XSEL-P/Q, SSEL, SCON Controller]
Dedicated cable
(Connect actuator with the dedicated controller)
r = 58mm or mere (Movable Use)
r = 38mm or mere (Fixed Use)
Dedicated controller
XSEL-P/Q, SSEL, SCON
x Motor Cable CB-X-MA***
x Encoder Cable with LS CB-X1-PLA***
*** indicates the cable length.
Up to 30m can be specified.
Example) 080 = 8 m