IAI America RS - Manual (Page 25)

2. Installation
19
2. Installation
2.1 Transportation
[1] Handling of the Robot
Unless otherwise specified, the actuators are wrapped individually when the product is shipped out.
(1) Handling of the Packed Product
x Do not damage or drop. The package is not applied with any special treatment that enables it to
resist an impact caused by a drop or crash.
x An operator should never attempt to carry a heavy package on their own. Also, use an
appropriate way for transportation.
x If the shipping box is to be left standing, it should be in a horizontal position. Follow the
instruction if there is any for the packaging condition.
x Do not step or sit on the package.
x Do not put any load that may cause a deformation or breakage of the package.
(2) Handling after Unpackaged
x Do not carry the actuator by holding the cable, or do not move it by pulling the cable.
x Hold the body base when transporting the actuator.
x Do not hit or drop the product while carrying.
x Do not give any excessive force to any of the sections in the actuator.