Harrington Hoists and Cranes Series 3 End Truck User Manual
End trucks top running & underhung series 3
Table of contents
Document Outline
- Table of Contents
- 1.0 Important Information and Warnings………………………………………………………………………….5
- 2.0 Technical Information…………………………………………………………………………………………..8
- 3.0 Assembly, Installation and Test Trial Operation…………………………………………………………….24
- 4.0 Operation………………………………………………………………………………………………………36
- 5.0 Inspection……………………………………………………………………………………………………...37
- 6.0 Lubrication…………………………………………………………………………………………………….. 44
- 7.0 Maintenance & Handling……………………………………………………………………………………...45
- 8.0 Troubleshooting……………………………………………………………………………………………….49
- 9.0 Warranty……………………………………………………………………………………………………….52
- 10.0 Parts List……………………………………………………………………………………………………….54
- 1.0 Important Information and Warnings
- 2.0 Technical Information
- This Page Intentionally Left Blank
- 3.0 Assembly, Installation and Trial Operation
- 4.0 Operation
- 5.0 Inspection
- 6.0 Lubrication
- 7.0 Maintenance and Handling
- Figure 7-1 Structural drawing of gear motor
- 8.0 Troubleshooting
- 9.0 Warranty
- N6 Parts List Rev16-English.pdf
- 10.0 Replacement Parts Guide
- Figure 9-1 End Truck Nameplate
- Applicable End Truck Models - UP-3-0135 to 0535
- Applicable End Truck Models - UMX-3-0235 to 0550 & UG-3-0235 to 0550
- Applicable End Truck Models - TP-3-0135 to 0535
- Applicable End Truck Models - TMX-0135 TO 0560 & TG-0135 TO 0550
- Applicable End Truck Models - TMX-1035 to 1060
- Hand Wheel and Drive Shaft Assembly Parts List
- Name
- Drawing Number
- Kit B
- Applicable End Truck Gear Motor Models - G1J025 & G1J040
- Applicable End Truck Gear Motor Model - G1J075 & G1J150
- Applicable End Truck Models: UG-3-03xx, TG-3-01xx, & TG-3-0535
- Drawing/
- Notes
- Name
- Applicable End Truck Models: UG-3-05xx & TG-3-0550
- Drawing/
- Notes
- Name