Harrington Hoists and Cranes Series 3 End Truck User Manual

Page 35

Text mode
Original mode

3.7

Testing

3.7.1

Record the hoist’s Code, Lot, and Serial Number (from the nameplate on the hoist; see section 9) in the
space provided on the cover of this manual.

3.7.2

Prior to initial use the crane system (including all components) should be tested in accordance
with the manufacturer's requirements and applicable ANSI standards. ANSI Standards that may
apply for crane system applications include:

• ANSI B30.2 Overhead and Gantry Cranes
• ANSI B30.11 Monorails and Underhung Cranes
• ANSI B30.16 Overhead Hoists (Underhung)
• ANSI B30.17 Overhead and Gantry Cranes (Top Running Bridge Single Girder,

Underhung Hoist).