SKC Limited EPAM-5000 - Manual (Page 45)

File Menu Commands
Introduction Use the File Menu option to open, save, print, close and export sampled data.
You can also use the File Menu to Exit the DustComm Pro Software
Notes:
• Data is sorted by time collected.
• Data points are reported in mg/m
3 .
Opening an
existing project
folder Follow the steps in the table below to retrieve stored project data.
NOTE: A sample .dcm file is preloaded for review of software options.
Step Action
1 Select File.
2 Select Open.
3 Double click on the desired Project Folder.
Note: DustComm will save all files in My Documents, or user
selected folder.
Saving a
project folder Follow the steps in the table below to store project data.
Step Action
1 Select File.
2 If... Then Select...
• Saving the data in the project
folder for the first time, or,
• Saving an existing folder to a
new name or location.
1. Save As, then,
2. Type a file name for
the project file.
3. Select OK.
Saving an updated version of an
existing project folder to the same
file name and location.
Save
Result: The data is saved in the new project folder and the new
file name is displayed in the title bar. Only with Save As with the
data have a new file name and location if selected.
Continued on next page
4- 6