Ronan X96S LEVEL GAGE - Manual (Page 39)

35
Configuration
Ronan ships the Level Monitor System with factory-default software settings. Those settings are responsible for the information
that initially appears on the status displays.
After installation at your site, you may need to reconfigure the system to fit your application. The goal is to correlate the X96S
output with your actual level readings. The list below summarizes the activities that are detailed in the remainder of this chapter:
- Check the factory-default settings to be sure they are appropriate for your circumstances. IF NOT, make the necessary
changes and document those changes for future reference.
- Perform an initial calibration to correlate the X96S’s output to the actual process level
- Document detector output counts at calibrated values to assist in troubleshooting. Also, record changes you make to factory-
default settings. Keep this information for future reference.