Ronan X96S LEVEL GAGE - Manual (Page 25)

21
Input Menus
The menu of each input (Input 1 through Input 8) contain the following items:
ITEM FUNCTION
Polarity Shows, and allows the user to set, the active state of the digital input
Type Shows, and allows the user to set, the type of device connected to the the digital input
Polarity is one of the following:
Polarity MEANING
Low A “true” is represented by a low signal on the digital input
High A “true” is represented by a high signal on the digital input
Type is one of the following:
Type MEANING
Manual Push button switch
Sensor Rise Sensor/relay, only rising level used
Sensor Fall Sensor/relay, only falling level used
Sensor Both Sensor/relay, both rising and falling level used
Calibration Menu
This menu is used to view and control the calibration of the X96S Level Gage. It contains the following items:
ITEM FUNCTION
State Shows the state of the level configuration process
Ref Constants Selecting this item takes the user to the Ref Constants menu
Calibrate Selecting this item takes the user to the Calibrate menu
Ref Date Shows the date on which the gage was most recently Low Referenced.
Loop Config Selecting this item takes the user to the Loop Config menu
Aux Loop Cfg Selecting this item takes the user to the Aux Loop Cfg menu
State is one of the following:
State MEANING
Uncalibrated Needs reference and calibrate.
Referenced Needs calibrate
Partial Cal Needs reference
Need Ref Level Reference level must be entered
Need Cal Level Calibration level must be entered
Fully Calibrated Calibration complete
Invalid Data Reference and calibrate data is inconsistent
Ref Constants Menu
This menu is used to view and control the reference constants used in the reference and calibration procedures. It contains the
following items: