Ronan X96S LEVEL GAGE - Manual (Page 22)

18
ITEM FUNCTION
Tag Name Shows, and allows the user to set, the device tag name
MultiDrop Shows, and allows the user to set, the multi-drop address for a device (or 0 if the
device is not used on a multi-drop loop)
Univ Rev Shows the HART universal command revision to which this device is conformant
Spec Rev Shows the HART specification revision to which this device is conformant
System Menu
The System menu is used to provide information about the X96S. It contains the following items:
ITEM FUNCTION
Serial # Shows the device serial number
Hardware Rev Shows the device hardware revision
Software Rev Shows the device software revision
Date Shows, and allows the user to set, the date
Hour (0-23) Shows, and allows the user to set, the hour
Minute Shows, and allows the user to set, the minute
Date/Time Format Shows, and allows the user to set, the date/time format used on the status display
Date/Time Format is one of the following:
Date/Time Format MEANING
mm/dd/yy hh:mm:ss North American date and 24 hour time
mm/dd/yyyy hh:mm:ss North American Y2K date and 24 hour time,
mm/dd/yy hh:mm:ss
am/pm
North American date and 12 hour time with am/pm indication
dd-mm-yy hh:mm:ss European date and 24 hour time,
dd-mm-yyyy hh:mm:ss European Y2K date and 24 hour time
dd/mm/yy hh:mm:ss European date and 24 hour time
dd/mm/yyyy hh:mm:ss European Y2K date and 24 hour time
Digital Outputs Menu
This menu is used to view and configure the digital outputs. It contains the following items:
ITEM FUNCTION
Relay 1 Selecting this item takes the user to the Relay 1 menu
Relay 2 Selecting this item takes the user to the Relay 2 menu
Relay 3 Selecting this item takes the user to the Relay 3 menu
Relay 4 Selecting this item takes the user to the Relay 4 menu
TTL 1 Selecting this item takes the user to the TTL 1 menu
TTL 2 Selecting this item takes the user to the TTL 2 menu
TTL 3 Selecting this item takes the user to the TTL 3 menu
TTL 4 Selecting this item takes the user to the TTL 4 menu