Robertshaw Deluxe Programmable - Manual (Page 28)

TEMPERATURE OVERRIDE
Temporary Override (3 hours)
You may change the temperature setting temporarily at any time without affect-
ing the program.
Press the
s or t buttons. The current event temperature and mode of operation
will be displayed. Press the s or t buttons again to adjust the temperature. This
temperature will be maintained for three hours. To cancel, simply press the
RESUME button.
Temporary Override with Keyboard Locked (1 hour) (300-225, 300-227, 300-229)
You may change the temperature setting temporarily at any time without
affecting the program, even though they keypad is locked.
• Press the
s or t buttons. The display will show the temperature for the first
event. Press the s or t buttons again to adjust the temperature
+/-3 degrees. This temperature will be maintained for one hour.
Continuous Override (Hold)
You also may maintain a constant temperature setting at any time without affecting the program.
1. Press and release the MODE button until the desired mode is displayed (HEAT – AUTO – OFF
– COOL)
2. Press and release the HOLD button. HOLD will be displayed.
3. Press the
s or t buttons to adjust the temperature. This temperature will be maintained indef-
initely. To cancel, simply press the RESUME button.
Note: If the auto mode is used, press the MODE button, then press the s or t buttons to select a
heating setpoint. Press the MODE button, and then press the s or t buttons to select a cooling set-
point.
28