Robertshaw Deluxe Programmable - Manual (Page 25)

PLANNING YOUR SCHEDULE (300-225, 300-227, 300-229)
Your new Robertshaw programmable thermostat has been designed so that you can select
either 2 program periods (Day and Night) or 4 program periods (Morning, Day, Evening and
Night). The thermostat comes from the factory set for 4 program periods. To change this setting,
please refer to the “2 Events or 4 Events Per Day” section on page 8.
To help save programming time, we suggest you use the worksheet below to set-up your
specific program.
Note: If you plan to use the automatic changeover mode, you cannot set your heating and cool-
ing temperatures closer than 2 degrees apart for the same program period.
Programming Chart
25
PROGRAM PERIOD MORNING DAY EVENING NIGHT
Temperatures Heat:
Cool:
Heat:
Cool:
Heat:
Cool:
Heat:
Cool:
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
(Time) (Time) (Time) (Time)
0 2 1 ©