Kasco Marine Pond Aerator & Water Circulator - Manual (Page 3)

3
2 Year Warranty or 3 Year Warranty depending on the
model. This warranty covers any and all manufactur-
ers defects within the warranty period from the date
of purchase (See Warranty, Warranty Claim, & Return
Policy). Please register your Aerator online at:
www.kascomarine.com (under the technical tab)
USE AND OPERATION
Kasco Aerators are designed and engineered for
continuous duty, such as on fish farms or other aqua-
culture applications, or on-demand use, as needed in a
recreational water feature.
During flotation operation, the water is pulled from
360 O around the unit and from below the unit. The
water is pulled upward and thrust through the flotation
collar into the air.
Your Kasco Marine Aerator is ready for immediate use
(after installation). Make sure to keep the motor hous-
ing clean from hard water deposits and/or algae. (See
Maintenance Recommendations.)
Kasco Pond Aerators and Water Circulators are light-
weight, energy efficient, and easy to install and oper-
ate. We strive to produce products that exceed cus-
tomer expectations. We hope you enjoy your Kasco
Pond Aerator or Water Circulator.
Unit Specs
Model Voltage Operating
amps
lock rotor
amps
single phase aerators
2400AF 115 5 @115V 12@115V
3400AF 115 6.7 @115V 18@115V
3400HAF 208-240 3.4 @240V 9@240V
4400AF 115 11.3@115V 40@115V
4400HAF 208-240 5.7@240V 20@240V
8400AF 208-240 9.0 @240V 40@240V
3.1AF 208-240 10.7 @240V 63@240V
5.1AF 208-240 18 @240V 97@240V
3 phase aerators
2.3AF 208-230 4.5 @ 230V 40
3.3AF 208-230 8.2 @ 230V 70
5.3AF 208-230 13 @ 230V 100
2.3HAF 460 2.3 @ 460V 20
Model Voltage Operating
amps
lock rotor
amps
3.3HAF 460 4.1 @ 460V 35
5.3HAF 460 6.5 @ 460V 50
Single phase circulators
2400CF 115 5@115V 12@115V
3400CF 115 6.7@115V 18@115V
3400HCF 208-240 3.4@240V 9@240V
4400CF 115 11.3@115V 40@115V
4400HCF 208-240 5.7@240V 20@240V
8400CF 208-240 9.0@240V 40@240V
2400AF, 3400AF/HAF, 4400AF/HAF Parts
Included:
1. Aerator (Unit with cord or unit with Disconnect(1)
2. Float (with three 50’ mooring ropes attached) (1)
3. 1/4-20 x 3 1/2” Phillips Pan Head Screw (4)
4. 1/4” split washers (4)
5. 1/4” (3/4” outer diameter) Flat Washer (4)
6. Float Retaining Clips (4)
Optional: May be sold separately (bottom screen
installation parts 7-12)
7. 3/8”-16 x 1-3/4” Hex Head Bolt (2)
8. 3/8” Flat Washer (4)
9. Bottom Screen cushions (3)
10. Bottom Screen (1)
11. Bottom Screen Clips (2)
12. 3/8”-16 Nylon Lock Nut (2)