General Tools and Instruments CIH20DL - Manual (Page 23)

MAINTENANCE TIPS
Remove the battery before storing the meter for an extended period of time.
Do not drop or disassemble the meter or immerse it in water.
WARRANTY INFORMATION
General Tools & Instruments’ (General’s) CIH20DL Data Logging Hot Wire Anemometer with
CFM/CMM and 8:1 IR Thermometer is warranted to the original purchaser to be free from
defects in material and workmanship for a period of one year. Subject to certain restrictions,
General will repair or replace this instrument if, after examination, the company determines it
to be defective in material or workmanship.
This warranty does not apply to damages that General determines to be from an attempted
repair by non-authorized personnel or misuse, alterations, normal wear and tear, or
accidental damage. The defective unit must be returned to General Tools & Instruments or to
a General-authorized service center, freight prepaid and insured.
Acceptance of the exclusive repair and replacement remedies described herein is a condition
of the contract for purchase of this product. In no event shall General be liable for any
incidental, special, consequential or punitive damages, or for any cost, attorneys’ fees,
expenses, or losses alleged to be a consequence of damage due to failure of, or defect in
any product including, but not limited to, any claims for loss of profits.
RETURN FOR REPAIR POLICY
Every effort has been made to provide you with a reliable product of superior quality.
However, in the event your instrument requires repair, please contact our Customer Service
to obtain an RGA (Return Goods Authorization) number before forwarding the unit via prepaid
freight to the attention of our Service Center at this address:
General Tools & Instruments
80 White Street
New York, NY 10013
212-431-6100
Remember to include a copy of your proof of purchase, your return address, and your phone
number and/or e-mail address.
23
CIH20DL-FINAL-122111_awb 12/21/11 9:58 AM Page 23