Accton Technology ES4524D - Manual (Page 95)

Remote Log Configuration
9-3
9
• Host IP Address – Specifies a new server IP address to add to the Host IP List.
Web – Click System, Logs, Remote Logs. To add an IP address to the Host IP List,
type the new IP address in the Host IP Address box, and then click Add. To delete
an IP address, click the entry in the Host IP List, and then click Remove.
Figure 9-2 Remote Logs
CLI – Enter the syslog server host IP address, choose the facility type and set the
logging trap.
Console(config)#logging host 10.1.0.9 37-3
Console(config)#logging facility 23 37-3
Console(config)#logging trap 4 37-4
Console(config)#logging trap
Console(config)#exit
Console#show logging trap
37-5
Syslog logging: Enabled
REMOTELOG status: Disabled
REMOTELOG facility type: local use 7
REMOTELOG level type: Warning conditions
REMOTELOG server ip address: 10.1.0.9
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
Console#