Accton Technology ES4524D - Manual (Page 363)

Web Server Commands
41-11
41
Web Server Commands
This section describes commands used to configure web browser management
access to the switch.
ip http port
This command specifies the TCP port number used by the web browser interface.
Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
Command Mode
Global Configuration
Example
Related Commands
ip http server (41-11)
ip http server
This command allows this device to be monitored or configured from a browser. Use
the no form to disable this function.
Syntax
[no] ip http server
Default Setting
Enabled
Table 41-7 Web Server Commands
Command Function Mode Page
ip http port Specifies the port to be used by the web browser interface GC 41-11
ip http server Allows the switch to be monitored or configured from a browser GC 41-11
ip http secure-server Enables HTTPS (HTTP/SSL) for encrypted communications GC 41-12
ip http secure-port Specifies the UDP port number for HTTPS GC 41-13
Console(config)#ip http port 769
Console(config)#