Fairbanks 2800 Series Intrinsically Safe Instrument - Manual (Page 9)

Section 1: General Information
01/12 9 50647 Rev. 9
1.3. ACCESSORIES
1.3.1. ACCESSORY 2802 INTRINSICALLY SAFE CONTROLLER
( 22119 )
 Each controller allows up to four (4) load cells to be interconnected
 Communicates to the Model 2800 Series Instrument using Intalogix ™
Technology
 Enclosure: NEMA 4X, Stainless steel
1.3.2. ACCESSORY 2825 SAFE AREA POWER SUPPLY ( 18448 )
 This accessory will provide continuous power to the Model 2800 Instrument.
 The Accessory 2830 cannot be used with this accessory, as this accessory is
installed in a non-hazardous, safe area only.
 Enclosure: NEMA 4, Fiberglass
 Output: 7 VDC
1.3.3. ACCESSORY 2830 BATTERY ( 20615 )
 Supplies battery power to the Model 2800 Series Instrument.
 It must be recharged in a non-hazardous, safe area using Accessory 2845 or
2846 only.
 Accessory 2830 is the only battery approved to be used with the
Model 2800 Series Instruments for all applications.
C A U T I O N
Battery surface gets very HOT during recharging!
DO NOT USE Accessory 2830 in conjunction with Accessory 2825.