Fairbanks 2800 Series Intrinsically Safe Instrument - Manual (Page 41)

Section 3: Programming
01/12 41 50647 Rev. 9
3.5.1. I/O MENU DESCRIPTIONS, CONTINUED
PROMPT COMMENT(S)
LoSEt  Sets the weight value associated with 4mA.
 Usually
" 0 ".
1. At the LoSEt prompt, press ENTER .
2. Use the numeric keypad to enter desired weight value.
3. Press
ENTER .
hiSEt  Associated weight value of 20MA.
 Usually the capacity of the scale.
1. Press
ENTER at the hiSEt prompt.
2. Use the numeric keypad to enter the desired weight value.
3. Press
ENTER .
4 AdJ Press ENTER to display a current number representing the 4mA Output.
─ See note on key functions.
20 AdJ Press ENTER to display a current number representing the 20mA
Output.
─ See note on key functions.
AgtESt  LP4 - TO - LP22 .
 Press ENTER to perform an analog test.
 4mA thru 22mA will be output momentarily in 2mA steps.
When adjusting either 4mA or 20mA, the following numeric keys increase
or decrease the reference value in the fashion that follows.
Increased by: Decreased by:
9 10,000 4 10,000
8 1,000 3 1,000
7 100 2 100
6 10 1 10
5 1 0 1
ConoPt Used for Continuous Output.
Choices include the following:

3052r  FbStd  FbPUtr  troniC  ConCon
ProtoA Protocol setting for Port A choices include selections for the following:

bAUd 9600, 600 , 1200 , 2400 , and 4800
 ChAr 8 and 7
 PAritY nonE , odd , and EuEn