Fairbanks 2800 Series Intrinsically Safe Instrument - Manual (Page 49)

01/12 49 50647 Rev. 9
Appendix I: Troubleshooting/Error Codes
FAULT CAUSE SOLUTION
-UL-- LOADCELL FAILURE Scale restricted.
Debris under scale.
Scale behind 0.
Load Cell failure. Correct the bind or restriction.
Remove debris under the
scale/cells.
Replace items removed from
the scale.
Call Fairbanks service.
--oL-- LOADCELL
FAILURE
Overloaded Scale.
Load Cell failure. Remove weight from the scale.
Call Fairbanks service.
 RECHARGE Battery voltage low
between 5.4 to 5.32VDC. Recharge the battery.
 LoBAtt Battery voltage low, between
5.3
to 5.12VDC
Recharge the battery
IMMEDIATELY.
 err 069 Programming input error. Recycle the power to
instrument.
 likely lc error 0shift out of range
Load Cell Failure.
Remove weight from the scale.
Re-zero the scale.
Call Fairbanks service.