Fulton Pulse HW (PHW) Fully Condensing Hydronic Boiler - Manual (Page 51)

Questions? Call (315) 298-5121, or visit us online at www.fulton.com
SECTION 3
PHW-IOM-2013-0214
OPERATION
3-15
!
WARNING
Non-Fulton product information is for
reference purposes only. No Fulton
document may substitute for full
review of documentation available
from the component manufacturer.
Operating this equipment beyond
its design limits can damage the
equipment and can be dangerous.
Do not operate the equipment
outside of its limits. Do not try to
upgrade the equipment performance
through unapproved modifi cations.
Unapproved modifi cations may
cause injury, equipment damage, and
will void the warranty.
temperature. Minimum outdoor temperature relates to Central Heat
Setpoint. See Figure 38. Minimum boiler water temperature should be the
lowest temperature at which you want the boiler to function.
4. Master Boiler – While still in the Advanced Settings Screen, arrow over
to Central Heat and Select your Setpoint. This is what your Minimum
outdoor temp will relate to on the curve. Once all 4 numbers are entered
FIGURE 37 - ADVANCED SETTINGS
FIGURE 36 - ACCESSING THE CONFIGURATION MENU
FIGURE 38 - OUTDOOR RESET