PROLiNK H5004N Wireless-N - Manual (Page 62)

PROLiNK ® H5004N User Manual www.prolink2u.com
Version 1.00 (Jan’10)
61
5.5 1483 Routed Mode
1. Open the WEB page at “WAN interface/Channel Configuration”.
2. Select the Channel Mode to “1483 Routed”. Set the parameters VPI/VCI and Encapsulation
mode according to the CO DSLAM’s setting.
3. In WAN IP settings, give the local and remote IP address from your ISP or use DHCP to get
them automatically if your ISP support it. Local IP is the address of ADSL router. Remote IP
is the ISP’s gateway address.
4. Click “Add” button to add this channel.
5. Open the WEB page at “Admin/ Commit/Reboot”. Press “Commit” to save the settings into
flash memory.
6. The new settings will take effect after reboot the system.