PROLiNK H5004N Wireless-N User Manual

Page 18

PROLiNK

H5004N User Manual

www.prolink2u.com

Version 1.00 (Jan’10)

Function buttons for the setting block:

Apply Changes

Click to add this entry into the Current Access Control List.

The Current Access Control List lists the client MAC addresses. Any wireless client with its

MAC address listed in this access control list will be able to connect to the device. You can

select the entries at the Select column and apply to the following function buttons.

Function buttons for the Current Access Control List:

Delete Selected

Delete the selected entries from the list.

Delete All

Flush the list.

4.2.5 WPS

Although home Wi-Fi networks have become more and more popular, users still have

trouble with the initial set up of network. This obstacle forces users to use the open

security and increases the risk of eavesdropping. Therefore, The Wi-Fi Protected Setup

(WPS) is designed to ease set up of security-enabled Wi-Fi networks and subsequently

network management.

The largest difference between WPS-enabled devices and legacy devices is that users do

not need the knowledge about SSID, channel and security settings, but they could still surf

in a security-enabled Wi-Fi network.

This device supports Push Button method and PIN method for WPS. The following sub-

paragraphs will describe the function of each item. The webpage is as below.