PROLiNK H5004N Wireless-N - Manual (Page 44)

PROLiNK ® H5004N User Manual www.prolink2u.com
Version 1.00 (Jan’10)
43
4.5.3 SNMP Configuration
Simple Network Management Protocol (SNMP) is a troubleshooting and management
protocol that uses the UDP protocol on port 161 to communicate between clients and
servers. The DSL device can be managed locally or remotely by SNMP protocol.
Fields in this page:
Field Description
System Description System description of the DSL device.
System Contact Contact person and/or contact information for the DSL device.
System Name An administratively assigned name for the DSL device.
System Location The physical location of the DSL device.
System Object ID
Vendor objects identifier. The vendor’s authoritative identification of the network
management subsystem contained in the entity.
Trap IP Address Destination IP address of the SNMP trap.
Community name (read-
only) Name of the read-only community. This read-only community allows read
operation to all objects in the MIB.
Community name (write-
only) Name of the write-only community. This write-only community allows write
operation to the objects defines as read-writable in the MIB.
Function buttons in this page:
Apply Changes
Save SNMP configuration. New configuration will take effect after saving into flash
memory and rebooting the system. See section “Admin” for details.