PROLiNK H5004N Wireless-N - Manual (Page 48)

PROLiNK ® H5004N User Manual www.prolink2u.com
Version 1.00 (Jan’10)
47
4.5.6 Remote Access (Moved to ACL Config – please refer to page 57)
The Remote Access function can secure remote host access to your DSL device from
LAN and WLAN interfaces for some services provided by the DSL device.
Fields in this page:
Field Description
LAN
Check/un-check the services on the LAN column to allow/un-allow the services
access from LAN side; and “WAN”:
WAN
Check/un-check the services on the WAN column to allow/un-allow the services
access from WAN side.
WAN Port
This field allows the user to specify the port of the corresponding service. Take the
HTTP service for example; when it is changed to 8080, the HTTP server address
for the WAN side is
http://dsl_addr:8080 , where the dsl_addr is the WAN side IP
address of the DSL device.