PROLiNK H5004N Wireless-N User Manual
Page 12
PROLiNK
®
H5004N User Manual
www.prolink2u.com
Version 1.00 (Jan’10)
11
4.2 Wireless
Configuration
This section provides the wireless network settings for your WLAN interface. The wireless
interface enables the wireless AP function for ADSL modem.
4.2.1 Basic
Setting
This page contains all of the wireless basic settings. Most users will be able to configure
the wireless portion and get it working properly using the setting on this screen.
Fields in this page:
Field
Description
Disable Wireless LAN Interface Check it to disable the wireless function for ADSL modem.
Band
Select the appropriate band from the list provided to correspond with your
network setting.
Mode
The selections are: AP
SSID
The Service Set Identifier (SSID) or network name. It is case sensitive and
must not exceed 32 characters, which may be any keyboard character.
The mobile wireless stations shall select the same SSID to be able to
communicate with your ADSL modem (or AP).
Channel Number
Select the appropriate channel from the list provided to correspond with
your network settings. You shall assign a different channel for each AP to
avoid signal interference.
Radio Power (mW)
The maximum output power: 15mW, 30mW or 60mW.