PROLiNK H5004N Wireless-N - Manual (Page 61)

PROLiNK ® H5004N User Manual www.prolink2u.com
Version 1.00 (Jan’10)
60
5.4 PPPoA Mode
1. Open the WEB page at “WAN interface/Channel Configuration”.
2. Select the Channel Mode to “PPPoA”. Set the parameters VPI/VCI and Encapsulation mode
according to the CO DSLAM’s setting.
3. Enter user/password from your ISP.
4. Click “Add” button to add this channel.
5. Enable DHCP server to allow the local PCs share the PPP connection. Reference to section
4.6.1 DHCP Server Configuration.
6. Set DNS address from your ISP. Reference to section 4.6.2 DNS Configuration.
7. Open the WEB page at “Admin/ Commit/Reboot”. Press “Commit” to save the settings into
flash memory.
8. The new settings will take effect after reboot the system.