Agilent Technologies Option H48 Multiport Test Set Z5623A - Manual (Page 33)

Agilent Technologies Z5623A Option H48 3-1
3 Using the Network Analyzer to
Control the Test Set
This chapter assumes the following:
• The instructions in Chapter 2 , “Installation,” have been
performed.
• The test set and associated equipment are connected as shown in
Figure 2-9 on page 2-15 .
This chapter shows you how the network analyzer can be used to
manually control the test set. The method presented here is considered
a manual one because the user manually enters individual commands
on a keyboard connected to the network analyzer. The chapter includes
the following sections:
• Preparing the Analyzer to Control the Test Set
• How to Send a Manual Command
• Common Errors in Manual Commands
• A List of GPIB Commands
• Restoring the Analyzer to its Normal Configuration
• Disaster Recovery