beautypg.com

Atlantis Land WEBSHARE 3G 244WN User Manual

Page 51

background image

51

Security Parameters

Field

Description

Security Mode

Select WEP encryption.

WEP

Authentication

To prevent unauthorized wireless stations from accessing data

transmitted over the network, the router offers secure data

encryption, known as WEP. If you require high security for

transmissions, there are two options to select from: Open

System or Shared key.

WEP Encryption

To prevent unauthorized wireless stations from accessing data

transmitted over the network, the router offers highly secure

data encryption, known as WEP. If you require high security for

transmissions, there are two alternatives to select from: WEP

64 and WEP 128. WEP 128 will offer increased security over

WEP 64. The encryption can either be HEX or ASCII.

Passphrase (attivo

solo in caso di

selezione della

modalità HEX)

This is used to generate WEP keys automatically based upon

the input string and a pre-defined algorithm in WEP64 or

WEP128. You can input the same string in both the AP and

Client card settings to generate the same WEP keys. Please

note that you do not have to enter Key (1-4) as below when

the Passphrase is enabled. Passphrase will convert an inputted

string into the HEX format which will automatically fill the input

space for Key 1 to Key 4.

Default Used WEP

Key

Select the encryption key ID. There are 4 keys to choose from

so that you will not have to re-create a key every time you

decide to have it as something different. You can just have 4

sets of keys to rotate instead of jus having 1 key. Please refer

to Key (1~4) below.

Key 1 – 4

Enter the key to encrypt wireless data this can be in ASCII or

HEX depending on the WEP Encryption that you have selected

above. To allow encrypted data transmission, the WEP

Encryption Key values on all wireless stations must be the same

as the router. There are four keys for your selection. The input

format is in HEX (10 and 26 HEX codes) or ASCII style (5 and

13 ASCII codes) are required for WEP64 and WEP128

respectively no any separator is included.