Atlantis Land WEBSHARE 3G 244WN - Manual (Page 20)

20
3. Basic Installation
Before configuring this device, you have to check with your ISP (Internet Service
Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
VPI and VCI
VC-based / LLC-based multiplexing
Username and Password
Service Name
PPPoA
VPI and VCI
VC-based / LLC-based multiplexing
Username and Password
RFC1483
Bridged
VPI/VCI
VC-based / LLC-based multiplexing
RFC1483
Routed
VPI/VCI
VC-based / LLC-based multiplexing
IP address
Subnet mask
Default Gateway (IP address)
IP address (DNS)
3.1 Factory Default Setting
Before configuring your, you need to know the following default settings:
• Username: admin
• Password: atlantis
• LAN IP Address: 192.168.1.254
• Subnet Mask: 255.255.255.0
• ISP setting in WAN side: PPPoA, VCMux, Routing, VPI=8, VCI=35
• SSID: A02-RAU244-W300N, Security: WPA-PSK
• WPA Passphrase: WebShare244WN
• DHCP Server enabled with IP pool from 192.168.1.100 to 192.168.1.199