Atlantis Land WEBSHARE 3G 244WN - Manual (Page 40)

40
6.3 Wireless Configuration
In this section, is possible to set all wireless connection parameters (transmission
mode, channel ID, security, etc).
Wireless
Field Description
WLAN Service Default setting is set to Enable. If you want to use wireless,
802.11n, 802.11g and 802.11b device in your network, you can
select Enable.
ESSID The ESSID is the unique name of a wireless access point (AP)
to be distinguished from another. For security propose, change
to a unique ID name to the AP which is already built-in to the
router’s wireless interface. It is case sensitive and must not
excess 32 characters. Make sure your wireless clients have
exactly the ESSID as the device, in order to get connected to
your network.
ESSID Broadcast It is function in which transmits its ESSID to the air so that
when wireless client searches for a network, router can then be