Atlantis Land WEBSHARE 3G 244WN - Manual (Page 19)

19
2.4.4 Cabling the LAN connection
In this mode, WebShare 3G 244WN can be connected to an existing LAN or can be
use to create a new local area network.
Is possible to connect the WebShare 3G 244WN through its embedded Gigabit
Ethernet switch or by its embedded Access Point (based on 802.11n specifications),
using a wireless client like NetFly 300 series.
Once you’ve checked all the connections and you’ve switched on the Router the
product will carry on immediately a diagnosis (about 10 seconds). Finished this, the
Led PWR will be fixed green and LAN and Wireless will blink green; DSL will blink
during sinchonization, and will be fixed when ADSL line is synchronized with WebShare
Router. If Led DSL blink continuously, please contact Your ISP in order to check ADSL
line state.
Ensure that all other devices connected to the same telephone line as your WebShare
(e.g. telephones, fax machines, analog modems) have a line filter (A01-AF2)
connected between them and the wall socket (unless you are using a Central Splitter
or Central Filter installed by a qualified and licensed electrician), and ensure that all
line filters are correctly installed and the right way around.