Atlantis Land WEBSHARE 3G 244WN - Manual (Page 117)

117
string entered in the configuration file. Once the string name is
matched, users from this IP address will be sent SNMP Traps.
Specify a name and password for authentication. And define the access right from
identified IP address. Once the authentication has succeeded, users from this IP
address will be able to view and modify the data.
The Host Name cannot be used with one word only. There are two
words should be connected with a '.' at least.
Example:
Host Name: homegateway ==> Incorrect
Host Name: home.gateway or my.home.gateway ==> Correct
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the
SNMPv2 security. The "c" comes from the fact that SNMPv2c uses the SNMPv1
community string paradigm for "security", but is widely accepted as the SNMPv2
standard. SNMPv3 is a strong authentication mechanism, authorization with fine
granularity for remote monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
RFC 1213 (MIB-II):
System group
Interfaces group
Address Translation group
IP group
ICMP group
TCP group
UDP group
EGP (not applicable)
Transmission
SNMP group