PASCO PS-2108 Dissolved Oxygen Sensor - Manual (Page 29)

Model No. PS-2108 Dissolved Oxygen Sensor
25 ®
Appendix A: Copyright and Warranty Information
Copyright Notice
The PASCO scientific 012-07688D manual is copyrighted and all rights are reserved.
However, permission is granted to non-profit educational institutions for reproduction of any
part of the Dissolved Oxygen Sensor manual providing the reproductions are used only for
their laboratories and are not sold for profit. Reproduction under any other circumstances,
without the written consent of PASCO scientific, is prohibited.
Limited Warranty
PASCO scientific warrants the product to be free from defects in materials and workmanship
for a period of one year from the date of shipment to the customer. PASCO will repair or
replace at its option any part of the product which is deemed to be defective in material or
workmanship. The warranty does not cover damage to the product caused by abuse or
improper use. Determination of whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made solely by PASCO scientific.
Responsibility for the return of equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage and shipped postage or freight
prepaid. (Damage caused by improper packing of the equipment for return shipment will not
be covered by the warranty.) Shipping costs for returning the equipment after repair will be
paid by PASCO scientific.
Equipment Return
Should the product have to be returned to PASCO scientific for any reason, notify PASCO
scientific by email, letter, phone, or fax BEFORE returning the product. Upon notification,
the return authorization and shipping instructions will be promptly issued.
NOTE: NO EQUIPMENT WILL BE ACCEPTED FOR RETURN WITHOUT AN AUTHORIZATION FROM
PASCO.
When returning equipment for repair, the units must be packed properly. Carriers will not
accept responsibility for damage caused by improper packing. To be certain the unit will not
be damaged in shipment, observe the following rules:
1. The packing carton must be strong enough for the item shipped.
2. Make certain there are at least two inches of packing material between any point on the
apparatus and the inside walls of the carton.
3. Make certain that the packing material cannot shift in the box or become compressed,
allowing the instrument come in contact with the packing carton.