PASCO ME-9833 Physical Pendulum Set - Manual (Page 24)

®
Model No. ME-9833 Physical Pendulum Set
24
If you are using ScienceWorkshop, click and drag the Graph icon from the list under ‘Displays’ to the measurement
name under ‘Data’ that you want to display. An empty Graph display will open with the measurement name on the
vertical axis and ‘Time’ on the horizontal axis.
To change the measurement shown in the Graph display, click and drag the measurement name from the list under
‘Data’ to the vertical axis of the Graph display.
OR
To change the measurement shown in the Graph display, hover the cursor over the measurement name on the vertical
axis of the Graph display until the cursor changes to a ‘List’ icon. Click the mouse once to open the List and select the
measurement that you want to use.
Appendix C: Technical Support, Copyright, Warranty
For assistance with the Physical Pendulum Set (ME-9833) or any other PASCO products, contact
PASCO as follows:
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone: (916) 786-3800
FAX: (916) 786-7565
Web: www.pasco.com
Email: [email protected]
Copyright Notice
The PASCO scientific 012-10461A Physical Pendulum Set manual is copyrighted and all rights
reserved. However, permission is granted to non-profit educational institutions for reproduction of
any part of the 012-10461A Physical Pendulum Set manual, providing the reproductions are used
only for their laboratories and are not sold for profit. Reproduction under any other circumstances,
without the written consent of PASCO scientific, is prohibited.
Warranty
For a description of the product warranty, see the PASCO catalog.