Acer Network Device Altos R520 User Manual
Page 85
75
Caution! Use extreme care when removing DIMMs. Too much
pressure can damage the connector. Apply only enough pressure
on the plastic levers to release the DIMM.
1
Observe the ESD precautions and pre-installation instructions
described on page 39.
2
Press the holding clips on both sides of the DIMM slot outward to
release the DIMM (A).
3
Gently pull the DIMM upward to remove it from the DIMM slot
(B).
4
Observe the post-installation instructions described on page 40.
To reconfigure the system memory:
The system automatically detects the amount of memory installed. Run
the BIOS setup to view the new value for total system memory and
make a note of it.