Acer Network Device Altos R520 - Manual (Page 51)

41
Opening the server
Caution! Before you proceed, make sure that you have turned
off the system and all peripherals connected to it. Read the “Pre-
installation instructions” on page 39.
You need to open the server before you can install additional
components. The front bezel and top cover are removable to allow
access to the system’s internal components. Refer to the following
sections for instructions.
Removing and installing the front bezel
To remove the front bezel:
1 If necessary, remove any cables attached to the control panel.
2 Grasp the front bezel at the outer edge and pull it straight out.