Acer Network Device Altos R520 - Manual (Page 118)

4 BIOS setup 108
Legacy USB
Support Enables or disables the support for
legacy USB devices. Enabled
Disabled
Auto
Port 60/64
Emulation Enables or disables the I/O port 60/64h
emulation support.
This parameter is enabled for complete
USB keyboard legacy support for non-
USB aware OS.
Enabled
Disabled
Device Reset
Timeout Select the number of seconds POST waits
for the USB mass storage device after
the start unit command. 20 Sec
10 Sec
30 Sec
40 Sec
Storage
Emulation When set to Auto, USB mass storage
devices with less than 530 MB will be
emulated as a floppy and the remaining
as hard drives.
The Forced FDD option can be used to
force a formatted HDD to boot as a FDD.
Auto
Floppy
Forced FDD
CD-ROM
Hard Disk
USB 2.0
Controller Sets the transfer rate at Hi Speed
(480 Mbps) or Full Speed (12 Mbps). Enabled
Disabled
Parameter Description Option