Assigning a hot spare disk – Acer Network Device Altos R520 User Manual
Page 176
Appendix B: RAID configuration
166
5
Select the RAID Level you want to configure. Create the logical
volume by specify the size at Select Size and click on Accept to
create the logical volume.
6
The RAID volume is created, click on Accept and Yes to save the
configuration.
7
Select Fast Initialize and click on Go to initialize the new logical
drives. You will see all the logical drives listed.
8
Click on Home to go back to the configuration menu.
9
Select Exit, click on Yes and press Ctrl+Alt+Del to reboot the
system.
Now you can reboot the system and install the Operating System
Assigning a Hot Spare Disk
1
Insert an additional SAS HDD.
2
Enter the Intel RAID BIOS Console Virtual Configuration.
3
Select a free disk marked as UNCONF GOOD and listed under
Physical Drives.
4
Select Make Global Dedicated HSP or Make Dedicated DSP
and click on Go.
5
Click on Home to go back to the configuration menu. You will see
the disk marked as Hotspare in pink and listed under Physical
Drives.