Minuteman Port A Scrub with Power Pack - Manual (Page 41)

41
Maintenance and Care
5.8.1 Cleaning the squeegee
Check the squeegee (Fig. 18/1) daily
and clean it as necessary .
To clean it, tip the machine to the rear
and lay it carefully on the shaft.
5.8.2 Changing the sealing strips
Check the rear (Fig. 18/2) and front
(Fig. 18/3) sealing strips on the squee-
gee weekly for signs of wear. The seal-
ing strips can be changed without the
need of tools.
1. Switch off the machine using the
main switch and disconnect the bat-
tery plug.
2. Tip the machine to the rear and lay it
carefully on the shaft.
3. Unscrew the knurled screws (Fig.
18/4) and remove the support strips
(Fig. 18/5).
4. Check the rear (Fig. 18/2) and front
(Fig. 18/3) sealing strips, change as
necessary.
The rear sealing strips (Fig. 18/
1) can be turned when worn.