Minuteman Port A Scrub with Power Pack - Manual (Page 20)

20
Operation
Squeegee adjustment lever (Fig. 9/1)
The operator can change the squeegee
position according to the direction of
movement.
Draw lever - reverse operation
Release lever - forward operation
Adjustable shaft (Fig. 9/2)
The shaft must be adjusted to the
height of the operator prior to operation.
To adjust the shaft, release the knob.
Bracket for Power Pack (Fig. 9/3)
In order to be able to start a cleaning
operation, the Power Pack must be
hooked into the bracket on the Port A
Scrub.
Battery plug Power Pack (Fig. 9/4)
The Power Pack battery plug is used to
enable power supply to the Port A
Scrub. When in charging mode, the bat-
tery plug must be inserted in the socket
on the Power Pack.
Power supply line, charger (Fig. 9/5)
The power supply line supplies power
to the charger during the charging pro-
cess. After the charging process has
been completed, the cable must be
wound back in the holder.
Charge control indicator (Fig. 9/6)
The charge control lamp indicates the
status of the charger
• LED (A) lights up yellow = <80%
charge
• LED (B) lights up yellow = >80%
charge
• LED (C) lights up green = 100%
charge
Errors are signaled by the red LED (D).
Contact your authorized Minuteman
service center in the event of an error!