Minuteman Port A Scrub with Power Pack - Manual (Page 14)

14
Starting Up
2.2 Before starting up daily
1. Check the following for wear:
- Brushes in the brush head (Fig. 5/
2)
- Sealing strips on the squeegee
(Fig. 5/3)
- Solution filter, air intake filter and
seals in the housing cover (Fig. 5/
4).
2. Check the fill level of the solution
tank (Fig. 5/5), refill as necessary.
Add cleaning agent as necessary,
refer to Section 5.5.1.
Only use cleaning agents suit-
able for the vendor (non-foam-
ing) and observe all the use,
disposal and warning informa-
tion provided by the cleaning
agent manufacturer.
3. Check the fill level of the recovery
tank (Fig. 5/6), empty as necessary.
4. Raise the brush head by tipping the
shaft back and slide the supporting
rollers (Fig. 5/8) to the working posi-
tion (X).
Fig.5
6
5
7
8
I
X
3 2
4
1