Minuteman Port A Scrub with Power Pack - Manual (Page 13)

13
Starting Up
9. Tip the machine a little using the
shaft (Fig. 4/1) until the supporting
rollers (Fig. 4/2) in can be pushed
into parking position (X). Lower the
machine onto the supporting rollers.
10.Loosen the slotted-head screw (Fig.
4/3) with a coin and pivot the cover
(Fig. 4/4) upwards.
11.Insert the brushes (Fig. 4/5) supplied
in the brush head, close the cover
and secure it again with the slotted-
head screw.
Fig.4
2
3
X
1
4
5