Micromod RetroPAK: SLC Installation Manual - Manual (Page 11)

SLC RetroPAK Controller
PRODUCT DESCRIPTION
5
1.2 EXPLANATION OF CATALOG NUMBERS
1.2.1 General
The products described in this book have catalog numbers that help identify specific features.
In addition, some products are assigned a serial number which can be used to track
manufacturing data. The general format of the catalog number is described in this section.
Specific product descriptions are provided in the following sections.
The catalog number stamped on the product data plate contains a series of single and
multiple-character codes. These codes provide specific information concerning various
electrical and/or structural options. Certain code combinations are not allowed, and options
and combinations are subject to change. An example of a typical catalog number is as
follows:
Sample Catalog No. 1800R Z 21 1 0 0 A
Base Number
Unused
Approvals
Power Supply
Enclosure
Mounting
Model/Design Level
1.2.2 Electrical Codes
Code 21 - FM Approved and CSA Certified
The SLC RetroPAK Controller is Factory Mutual (FM) Approved and Canadian Standards
Association (CSA) Certified for installation in Class I, Division 2, Groups A, B, C or D
Hazardous (Classified) locations.
Code 12 - EU EMC Compliant
The RetroPAK Controller complies with the requirements for European Union (EU)
Electromagnetic Compatibility (EMC) when installed in accordance with the instructions in
Sections 2, 3, 4, and 5. This compliance includes all modules described in Sections 1.3,
1.4, and 1.5, and listed in Table 2-1.